Cordex® CT-IPM

The current transducers paired with the CT-IPM behaves similar to a current shunt and is then connected to the monitoring devices such as the L-ADIO, 6I-ADIAO and HV-ADIO. The CT-TPM makes it possible to measure the RMS value of an AC feed (50Hz/60Hz) or the direct value of a DC feed. It further provides CAN power on its CAN OUT connector. This feature is intended for power injection in to any existing CAN lines.

The CT-IPM does not by itself communicate via CAN. The ACCT outputs provide an RMS representation of the current when measuring AC while the DCCT outputs preserve the polarity information when measuring DC current. Both AC and DC currents can be measured using the same transducer.

Interfaces with current transducers and provides power necessary
Flexible rack, panel and DIN mount options
Integration of current transducers into the Alpha® peripheral product family
CAN power provided for injection into existing CAN lines

Product Specification

Take a look at the following Cordex® CT-IPM product specification:

Product Type	Peripherals
Application	Small Cells Macro Cells Network Access In-building Wireless Central Offices / Switching Centers Inside Plant 5G, Small Cells & WiFi Public Safety Networks Security & Surveillance Traffic & Intelligent Transportation Systems (ITS) Edge Computing Mobile Core Outdoor Small Cells Private 5G Networks 5G Macro Cells
CAN	5Vdc 500mA max, on CAN Out connector only / Signal pass through
Input Power	10 to 60VDC, 11W
Input Voltage	10 to 60VDC, 11W
Mounting	DIN/Panel mounting (0370196)
Input Current	1.2A max
LED	Power (Blue)
CT Interface	±10VDC Signal DC or 50/60Hz AC / ±15VDC Bias for sensor
Analog Output	DCCT output +-200mVDC / ACCT output 0-200mVDC
Dimensions H x W x D (inches)	5.1 x 3.3 x 1.2
Dimensions H x W x D (mm)	131.3 x 83.9 x 28.9

Cordex® CT-IPM

Product Specification

NEED HELP FINDING THE BEST SOLUTION?